Honma tokyo coffee premium:

 

Directions honma tokyo coffee green:

            

Manual honma tokyo h-brush:

Manual honma tokyo plastica capilar:

------------------------------------------------------------------------------------------------------------------------------------------------

BRAZILIAN SMOOTHING METHOD INOAR MARROQUINO

INSTRUCTIONS D’UTILISATION DU LISSAGE BRESILIEN INOAR MARROQUINO

 

The application of Brazilian smoothing INOAR Marroquino hair care, can take 1h30 to 2h30 depending on the length and type of hair.

It is advisable to be helped by a friend to ensure that all the wicks are properly treated especially in the back of the head.

Equipment required:

  • A bowl
  • A brush
  • A comb
  • A brush
  • A dryer
  • A smooth iron
  • Gloves and mask.

Preparation:

We advise you to make your Brazilian smoothing in an airy room.

 

STEP 1.

  • Wash hair 1 to 2 times with clarifying shampoo (step 1)
  • Let it sit for three minutes, rinse
  • Sprinkle hair with a towel and dry it with the hair dryer at 80%.
  • Do not brush or loosen the hair so as not to close the cuticles.
  • Divide the hair into 4 parts to prepare them to receive treatment.

 

STEP 2.

  • Put the protective gloves and possibly the mask if your room is not well ventilated
  • Shake the bottle and pour the product into the bowl. (step 2)
  • Work on wicks of 3 cm wide and 2 cm thick starting with the neck.
  • Apply the product to 1cm of the scalp to the tip
  • Well mix each wick
  • Pass a fine comb several times for a good distribution of the product and remove the surplus.
  • Let the product act between 15 minutes and half an hour depending on the degree of frying.

 

STEP 3.

  • Dry at 80% the hair using the dryer and brush. during this stage, the brush must be used only to discipline the hair without actually smoothing or giving it shape. The smoothing will be done later.
  • Divide the hair into 4 sections.
  • To seal the product in the hair, smooth each wick of 0.5cm thick with a smooth iron.
  • Start with the neck and pass the iron to smooth at 220° from 10 to 15 times per wick from root to tip with the same intensity.
  • Do not rinse the product for 48 hours by ironing to smooth every day in order to optimize the result of your Brazilian smoothing.

For optimal maintenance of your Brazilian smoothing, it is advisable to use shampoos without sodium laureth sulfate.

Different ranges of Brazilian smoothing care and maintenance are available on our site.

----------------------------------------------------------------------

BRAZILIAN SMOOTHING METHOD INOAR GHAIR

INSTRUCTIONS D’UTILISATION DU LISSAGE BRESILIEN INOAR GHAIR

 

The application of Brazilian smoothing INOAR Ghair hair care, can take 1h30 to 2h30 depending on the length and type of hair.

It is advisable to be helped by a friend to ensure that all the wicks are properly treated especially in the back of the head.

 

Equipment required:

  • A bowl
  • A brush
  • A comb
  • A brush
  • A dryer
  • A smooth iron
  • Gloves and mask.

 

Preparation:

We advise you to make your Brazilian smoothing in an airy room.

 

STEP 1.

  • Wash hair 1 to 2 times with clarifying shampoo (step 1)
  • Let it sit for three minutes, rinse
  • Sprinkle hair with a towel and dry it with the hair dryer at 80%.
  • Do not brush or loosen the hair so as not to close the cuticles.
  • Divide the hair into 4 parts to prepare them to receive treatment.

 

STEP 2.

  • Put the protective gloves and possibly the mask if your room is not well ventilated
  • Shake the bottle and pour the product into the bowl. (step 2)
  • Work on wicks of 3 cm wide and 2 cm thick starting with the neck.
  • Apply the product to 1cm of the scalp to the tip
  • Well mix each wick
  • Pass a fine comb several times for a good distribution of the product and remove the surplus.
  • Let the product act between 15 minutes and half an hour depending on the degree of frying.

 

STEP 3:

  • Dry at 80% the hair using the dryer and brush. during this stage, the brush must be used only to discipline the hair without actually smoothing or giving it shape. The smoothing will be done later.
  • Divide the hair into 4 sections.
  • To seal the product in the hair, smooth each wick of 0.5cm thick with a smooth iron.
  • Start with the neck and pass the iron to smooth at 220° from 10 to 15 times per wick from root to tip with the same intensity.

 

STEP 4:

  • Cool the hair with cold air ( hair dryer)
  • Rinse the product with cold water
  • Remove excess water and apply the finishing mask (step 3)
  • Massage hair for 5 minutes
  • Rinse the hair with cold water
  • Your smoothing is finished you can now stylize your hair as you wish.

For optimal maintenance of your Brazilian smoothing, it is advisable to use shampoos without sodium laureth sulfate.

A range of smoothing care and maintenance INOAR Ghair is available on our website.

---------------------------------------------------------------------

Instructions inoar argan oil

The application of Brazilian smoothing INOAR Argan oil hair care, can take 1h30 to 2h30 depending on the length and type of hair.

It is advisable to be helped by a friend to ensure that all the wicks are properly treated especially in the back of the head.

Equipment required:

  • A bowl
  • A brush
  • A comb
  • A brush
  • A dryer
  • A smooth iron
  • Gloves and mask.

Preparation:

We advise you to make your Brazilian smoothing in an airy room.

STEP 1.

  • Wash hair 1 to 2 times with clarifying shampoo (step 1)
  • Let it sit for three minutes, rinse
  • Sprinkle hair with a towel and dry it with the hair dryer at 80%.
  • Do not brush or loosen the hair so as not to close the cuticles.
  • Divide the hair into 4 parts to prepare them to receive treatment.

STEP 2.

  • Put the protective gloves and possibly the mask if your room is not well ventilated
  • Shake the bottle and pour the product into the bowl. (step 2)
  • Work on wicks of 3 cm wide and 2 cm thick starting with the neck.
  • Apply the product to 1cm of the scalp to the tip
  • Well mix each wick
  • Pass a fine comb several times for a good distribution of the product and remove the surplus.
  • Let the product act for 30 minutes.

STEP 3.

  • 100% dry the hair using the dryer and brush. during this stage, the brush must be used only to discipline the hair without actually smoothing or giving it shape. The smoothing will be done later.
  • Divide the hair into 4 sections.
  • To seal the product in the hair, smooth each wick of 0.5cm thick with a smooth iron.
  • Start with the neck and spend 8 to 10 times per wick the iron to smooth on hair:
    -Blonde, dried and colored at 180°
    -Natural or brown hair at 210°
    -Afro hair not colored at 230°

 

 

STEP 4.

  • Cool the hair with cold air ( hair dryer)
  • Rinse the product with cold water
  • Remove excess water and apply the finishing mask (step 3)
  • Massage hair for 5 to 10 minutes
  • Rinse the hair with cold water
  • Your smoothing is finished you can now stylize your hair as you wish.

 

For optimal maintenance of your Brazilian smoothing, it is advisable to use shampoos without sodium laureth sulfate.

Different ranges of Brazilian smoothing care and maintenance are available on our site.

--------------------------------------------------------------------------------------------------

Method of use premium keratin caviar

Put protective gloves in front

For those with sensitive scalp, apply to 1cm of the root

FOR SEMI-PERMANENT SMOOTHING

4-6 MONTHS

 

1 - wash hair with clarifying shampoo, rinse and dry 100%

2 - apply 50 to 70ml of the product (do not touch the scalp)

3 - paint to properly distribute

4 - take a 30-40 minute break

5 - 100% dry with a hairdryer, warm or cold air ventilation

6 - pass the iron to weave per wick 7–10 times to T200°

7 - wash 48 hours after with a sulfate-free shampoo

 

FOR BOTOX SMOOTHING

 

Ideal for people looking for more care than hardness


1 - wash hair with clarifying shampoo, rinse and dry 100%

2 - apply 50 to 70ml of the product (do not touch the scalp)

3 - paint to properly distribute

4 - take a break 20-30 minutes

5 - test hair resistance and elasticity

6 - pass the iron to weave per wick 3-5 times to T230°

6 - rinse cold water on the same day

FOR A REDEFINITION OF LOOPS

or instantaneous repair

1 - wash hair with clarifying shampoo, rinse and dry at 80%

2 - apply 50–70ml of the product (avoid contact with the scalp)

3 - paint to properly distribute

4 - put in plastic cup or cellophane
5 - take a pause of 40-60 minutes under heat or heat with a hairdryer (pass the hairdryer above the cap or cellophane

5 - rinse with cold water,

6 - hair !

--------------------------------------------------------------------------------------------------------------------------------

Brazilian standard smoothing method

SEE ALSO THE VIDEOS AVAILABLE ON THE WEBSITE[1]!!

 

Brazilian smoothing lasts between 2h (very short hair) at 4h for very long hair.

Try our premium keratin, essential keratin, honma tokyo & inoar professional.

 

First, it is important to remember that Brazilian smoothing is not a permanent smoothing but a thermal smoothing.

You must not expect to have hair stiff constantly: he's not a defensive.

 

Accessories are available within the available stock limit.

 

Brazilian smoothing with keratin will nourish, repair, make hair shiny, silky, easy to comb, remove frizz and provide smoothing help (especially thanks to the intake of heat).

It will come to gain the hair and not alter the molecular structure of the hair (like the deflection). He does not damage the hair, on the contrary.

Its effect lasts from 3 to 4 months depending on the nature of the treated hair and the maintenance provided during this period. it is important to consult the entire notice before any application.

 

The result is only guaranteed if all steps are met 100%.

 

  1. Wash the hair 3 times with the shampoo clarifying n°1 . make foaming the shampoo inallThe parts of your hair for 5 minutes. the purpose of this clarifying shampoo is to open the scale of your hair so at the most you will do it at the most the scale will open. purifying shampoo also removes all impurities in your hair to the end that kerat adheres as best as possible. allow the product to be placed for 4 minutes at each shampoo and rinse. ensure that the shampoo iswell rinsedBecause he tends to stick in the hair.

 

2Dry the hair at 90% using a hair dryer. The hair must remain a little wet.

 

3.AérezThe piece or you smooth to the end of the treatment! Preferably make it near a window and open the doors as well as the windows to create an air current.

 

Wearing gloves is mandatory from this stage

 

Calibrate (very fine) per mach the kerat on the hair 1.5 cm from the root.You don't have to put too much!

Keratin should not come into contact with the scalp or skin. if so, you must wipe it immediately.

Spread the kerat over the entire wick, massage the hair wick well to make the product enter and comb with a fine tooth comb. Make sure to comb your hair to the end of removing the kerat superflu, don't hesitate to spread it in dry hair.

 

Pack the hair in some kind aluminium and put a scarf/voile/bonnet. you will feel the lightly heated keratin. This is quite normal.

 

4Let's land for 1 hour - 1:30.

 

5. before making the brushing/plate, it is necessary to air maximum the part during the process. , open all windows preferably.

 

Dry your hair by drying your hair 100% using a hairdryer and a brush. at this stage it is not necessary to smooth, simply to dry. the hair must be dry to 100% from the root to the tip (very important)

Then make a good brushing.

 

6. before proceeding to the passages of the thickness, make sure every time the wick is 100% dry from the root to the tips (very important)

Pay attention to this step not to bruise your hair with too high temperature with the thickness depending on the nature of your hair.

 

Finally, wick (very fine) per wick slowly pass the heating plates at 230°(!if your licker does not heat up to230 °Get in one because it's very important!!) on several occasions (minimum 14 times). If your hair were sensitized, thin, broken and fragile passed the iron to smooth at 210 ° and passed the licker 5 to 7 times per wick, without overpressing the tips. You have to pass the hot plates on the wicks TRES fine. this stage is the most important, and determining to achieve an optimal result.

 

Then eat everywhere with the iron to smooth slowly mèche per wick for 15 to 20 minutes. If your hair were sensitized, thin, broken and fragile past the iron to smooth at 210 ° and pass the thickness 5 to 7 times per wick, without overpressing the tips

 

If you have strong hair dusk/loops don't hesitate to smooth your hair 3 times a day for 72 hours and even to keep the product longer than 72 hours at the end of having an even smoother result.

ATTENTION

NOT RINCER PENDENT 72H

 

 

 

AFTER 72H: Dry the hair with a hair dryer at the maximum temperature and brush the hair at the same time. If they are not steep enough to your taste, pass the hot plates 5 minutes.

 

SEE ALSO THE VIDEOS!

Any more questions? 0489/100.777 – sales@kit-lissagebresilien.com

 

 

 Material essential for smoothing:

 

-a weave of ceramic 230°

 

-a hair dryer 

 

-a pair of gloves 

 

- aluminium

 

-a fine tooth comb 

 

-a brush 

 

-a fan or a well ventilated part 

 

-a bowl 

 

-a mask 

 

A RESPECT WITHIN 3 DAYS OF SMOOTHING

 

Pass at least morning and evening the fine wick plates per fine wick at 230 °( min.14 times per wick) your lid must be passed at 230 ° and no less, this is very important! You have to pass very slowly in a wick. If you have strong hair dusk, don't hesitate to do it 3 times a day. If your hair were sensitized, thin, broken and fragile past the iron to smooth at 210 ° and pass the thickness 5 to 7 times per wick, without overpressing the tips

Do not attach your hair, clamp, or elastic. do not wet them (if this is the case to pass the plates immediately on your hair). do not put your hair behind your ears and not sunglasses for example on your head. If you wear a veil, don't shake it too hard. You must avoid anything that might give a shape to your hair.

 

Small advice: if you know keep the product + 72 h, the result will be even better. If you have a hair that greases fast, you can keep it 4 days on average and if you have very dry hair you can keep the product longer because they will not have a fat aspect.

 

 

 ATTENTION

 

Now you need to wash your hair with a shampoo, after-shampoing, serum, sulfate-free mask*[2] and preferably with keratin. products containing keratin make your hair even more shine. If you use products that contain sulfate sodium, the result will start very quickly.

Maintenance products sold on https://www.kit-lissagebresilien.com/en/ are all without sulfate sodium and contain kerat.

 

Special precautions

 

Keratin is not especially in contact with the scalp as well as the skin. If so, make sure to wipe the keratin immediately. Keratin treatment is not recommended for pregnant women, breastfeeding women, children under the age of 16, highly sensitive people. the wearing of protective gloves is mandatory during all treatment.

THIS PRODUCT IS NOT INTENDED TO BE USED ON PEOPLE UNDER 12 YEARS OF AGE. DO,

IMPORTANT: THIS PRODUCT CAN CAUSE AN ALLERGIC REACTION THAT IN SOME RARE CASES MAY BE SERIOUS.
TO HELP YOU PREVENT THE RISK OF ALLERGIC REACTION, IT IS ESSENTIAL TO COMPLY WITH THE FOLLOWING INSTRUCTIONS:

  • Temporary black tattoos based on henna can increase the risk of allergy
  • Do not color your hair if:
    • - you present a skin rash on your face or if your scalp is sensitive, irritated or damaged.
    • - You've already made a reaction after coloring your hair.
    • - you've made a reaction to a temporary black tattoo based on henna.

SPECIAL PRECAUTIONS

  • In case of reaction during the APPPLICATION such as intense tingling, irritations, buttons, burning sensation of the scalp, rinse immediately and stop use. in case of difficulty breathing, immediately request medical assistance. before redoing a color, consult a doctor.
  • If, during the following days of PAPPLICATION, itching, redness, knobs of the scalp or skin, swelling of eyes and/or face, cloaks or sores of the scalp and/or skin appear, it is recommended to consult a doctor.
  • Keep out of reach of children.
  • Avoid contact with the skin and eyes, do not use for coloring eyelashes and eyebrows.
  • Rinse the eyes immediately and abundantly if the product comes into contact with them. If you wear contact lenses, remove them before rinsing your eyes abundantly with water.
  • Wear the appropriate gloves provided in the case.
  • Rinse the hair well after application.
  • Prepare and apply the mixture of preference in a well ventilated place.
  • Do not inhale or inhale.
  • For any questions about your personal sensitivity, consult a doctor.
  • Do not use on beard or moustache or for use other than hair coloring. Avoid unnecessary contact with the skin.
  • Wait 15 days after defrosting, permanent or lasting smoothing.
  • Do not use if your hair has been colored by henna or progressive coloring.

 

 

 

The result is only guaranteed if all steps are 100% respected.

 

  We remain at your disposal for additional information.

0489/100.777

https://www.kit-lissagebresilien.com/en/

 

https://www.kit-lissagebresilien.com/en/ wish you a very good smoothing !!!!!!!

 

[1] https://www.kit-lissagebresilien.com/en/

[2] Sodium laureth sulfate, is a strong ionic detergent and surfactant. it distorts the proteins and gives them a negative overall load. it is found in various household products (soap, shampoos, toothpaste etc). it's not expensive and it's a very effective foaming agent.

 

Real fashion phenomenon, Brazilian smoothing is a demanding service delivery, which requires great professionalism. from shampoing to the passage of the plates, each step must be carried out with precision.

Diagnosis and exchange

Before embarking, it is necessary to make a precise diagnosis and determine whether the Brazilian smoothing is the service delivery best suited to the customer's expectations. jenny aponte, manager of the salon jenny & paola à paris, underlines: Customers often expect Brazilian smoothing that it has the effect of a defrosting. It is necessary to take the fronts and to inform it about the result: a Brazilian smoothing is, above all, a care that will relax the hair, but that will not have the power to defraud them. »And, depending on the typology of the hair, we will get different results. Diagnosis and exchange must be very pointed, so that the client is not disappointed,Confirm bruno branca, manager of two lounges in lyon. 10 years ago, the products contained formol, which allowed to stiffen the hair very frizzy. but, today, it is no longer the case, and it is up to the hairdresser to warn her client well on the result that she will get. »

Washing and drying meticulously

It is imperative to wash the hair with a specific shampoo, which will allow to remove all residues of products, such as gel, lacquer, oils or wax... The hair is conditioned to be rid of everything that could artificially embellish it,Precise browno Branca.If we neglect this step, the keratin will not be fixed on the hair. »Once naked, the hair is not soft and does not detang easily. Again, it is necessary to reassure the client: everything is normal. Then, a meticulous winding must be carried out,Su bruno branca. It is important, because if applied to poorly-sorbed hair, keratin will not have the expected impact. »

Keratin application

The application of keratin is done step by step, with relatively fine separations. it must be carried out in a homogeneous manner, ensuring that the hair is not too loaded. Do not hesitate to pass a fine comb to remove excess,Emphasizes Branca bruno.If we put too many products, the procedure will not be perfect: the hair may be smooth and difficult to smooth. »Once the product is well distributed, there is a time to apply, which can vary depending on the thickness of the hair and the mark used. 20 to 30 minutes, this is the average length of the laying time,Jenny Aponte.We're done, then, withhand dryer by brushing with a flat brush, in the sense of the fall of the hair. »It is then necessary to ensure that the hair is perfectly dry. passing the plates on a wet hair would have a catastrophic effect.

Proceed to the passage of the plates

Once the hair is dried, we will make separations to prepare the smoothing, which will be done by the plates. The goal is to seal the kerat, like a shell around the hair. The passage of the plates is cried out by wick,Jenny Aponte.If the hair is very frizzy, we'll pass the plates between 10 and 12 times. If it is a European-type hair type with frizz that need to be disciplined, we will pass the plates between 5 and 7 times.»For Breton bruno, it is not necessary to make many passages: it must be done slowly. I recommend fine separations. The more the hair is fine, the thicker the wicks can be, but they should not exceed 2 cm. Similarly, it is important to pass a comb in front of the iron, so as to smooth perfectly. The action of the comb is to smooth, that of the iron to fix.»Generally speaking, the passage of the plates is a fairly long stage, the duration of which may vary from 40 minutes to two hours. We must be patient,Concludes Jenny Aponte.And it is valid for both the hairdresser and the customer. Hence the importance of continuing to exchange.. »Finally, it is essential to adapt the temperature of the plates, depending on the nature of the hair. The more the hair is sensitized, the weaker the plates,precise browno Branca.Thus, on a thick hair, we can mount the temperature at 220°, while with a fine hair, we must not exceed 160°, at the risk of roasting it. »

Optimize the result

The procedure completed, the product is left on the hair. branca brown:This is the time to explain to the customer how to get an optimum result, once she left the living room. »Thus, it is recommended to let go 72 hours without shampoo and without humidity and, if possible, avoid doing sports and sweating. I also advise not to attach the hair, because they might take a bad fold. »Past 72 hours, the customer can wash his hair, preferably with a suitable professional product, which will allow him to have a Brazilian smoothing... optimized!

Florence bernardin

Brazilian smoothing is also a care

The strength of Brazilian smoothing is to tame the hair, while doing them good. In recent years, following the ban on formol, brands offer products with soft, more natural and less chemical formulations. the strength of these new, smooth products: it is their ability to thoroughly moisturize the hair, thanks to keratin and its beneficial action!

Product added to wishlist
Product added to compare.

Our shop uses cookies to improve the user experience and we recommend that you accept their use to fully enjoy your browsing.